32 bit Printing Instructions - WOPQ1 older server

Note: We have a new PCounter server which supports 64bit printing.
Use this page's instructions only if:

• you will not be attending the college after April 2011 or
• if you need printers not available on the WOPQ (the new server). WOPQ only has Woodroffe Access Center printers as of Dec 6,2010. More to come.

For the new server 64 or 32bit instructions go here

For this document in Word format. Or a Flash Demo

Please note that these instructions also work for Windows Vista and Windows 7 though the screens look slightly different.

• The following document describes how to connect to the printing system with your laptop.

  Before you attempt to install the printers, please make sure you have a connection to the College with either wireless or Ethernet.. Can you browse?

• 1. On your computer, click on START -> RUN
• 2. In the “Run” box, type in: \\wopq1 (See Figure A).
  
  
  Figure A
  
  
• 3. Click on “OK”.
  
  
• 4. You might be prompted to connect to the print queue server. If you are not prompted, skip to step 7 if you are prompted, proceed to step 5.
  

• 5. In the “Username” box type in: woodroffe\user0001 where user0001 is your College username (See Figure B).

• 6. In the “Password” box, type in your College password (see Figure B).
  
  
  Figure B
  
  

• 7. The Student Printer Queues window will come up (See Figure C).
  
  
  Figure C
  
• 8. Find the printer that you want to install on your laptop and right-click on it. Choose Install or Connect and follow the prompts.
• 9 Repeat as needed for other printers.